Previous page Next page Bottom Top One level up Home

Laboratories

Webpages concerning "Laboratories"

QCTL, Inc., a leading provider of nondestructive testing and crane inspection services for over 25 years, has both field and laboratory capable resources to meet the needs of a tremendous array of industries. Our third party independent status is our client's best assurance for the delivery of unbiased quality services.
http://www.testlab1.com
Keywords:
gage, x-ray, magnetic particle, liquid Penetrant, radiography, gauge, visual, inspection, testing, eddy current, calibration, NDT, NDE, non destructive, gamma, shearwave, ultrasonic, hardness, leak, crack, welder, qualification, level, dielectric, load, overhead, OSHA, pressure, certification, examination, safety, proofload, capacity, technician, ASME, nuclear, hoist, lifts, slings, hot sticks, ...

http://www.testlab1.com

Provides testing on products such as guitar strings; leather goods; circuit boards; aircraft wing tip material; paint; fasteners; electronics; steam valves and more.
http://www.nytesting.com
Keywords:
testing, inspection, inspections, astm, sae, awi, csw, density, physical properties, metallurgy, temperature, humidity, environmental, product, material, construction

http://www.nytesting.com

Bodycote's 33 Laboratories in Europe provide premium materials testing services - unparalleled in diversity and capabilities - utilising the vast experience of the entire Bodycote Materials Testing Group of 50+ labs in 10 countries.
http://mt.bodycote.com/
Keywords:
bodycote materials testing, materials testing, mechanical testing, failure analysis, corrosion, chemical analysis, environmental testing, sour service corrosion, fatigue testing, creep, and, stress, rupture

http://mt.bodycote.com/

Services include vibration testing, EMI/EMC/RFI testing, FCC certification testing, environmental and reliability testing. Since 1954.
http://www.garwoodtestlabs.com
Keywords:
mil s 901, lab, test, rfi, testing lab, emi, testing, vibration, test lab, emc, testing services, rtca do 160, environmental testing, g shock, vibration testing, shock testing

http://www.garwoodtestlabs.com

TouchStone Testing - Accredited Testing Laboratory
http://www.touchstone-testing.com
Keywords:
testing, flammability, A2LA, Bellcore, Telcordia, NEBS, environmental, simulation, high, low, temperature, humidity, IR, surface, solar, thermal shock, salt, spray, cycling, cass, altitude, decompression, overpressure, explosion, sand, dust, tensile, American Association, for Laboratory Accreditation, AALA, hardness, dime scrape, knife, crosshatch, tape, adhesion, abrasion, chemical, resistance, ...

http://www.touchstone-testing.com

IMR testing laboratory offers solutions for product testing, reverse engineering, product failure and lab management. Also offers materials research in Ithaca NY, Charleston SC, and Louisville KY.
http://www.imrtest.com
Keywords:
imr, product testing, reverse engineering, ithaca materials research, testing laboratories

http://www.imrtest.com

MAS offers a full range of analytical and testing services to clients in the Environmental, Industrial Hygiene, Indoor Air Quality, Semiconductor and Materials arenas. Founded in 1987, MAS now has 6 offices serving clients throughout the world.
http://www.mastest.com/
Keywords:
asbestos, industrial hygiene, IH, analytical services, instrument service, indoor air quality, IAQ, lead, mold, emission testing, chamber testing, VOC, chemical testing, materials analysis, failure analysis, FIB, TEM, AHERA, thermal desorption, XRD, SIMS, XPS, RBS

http://www.mastest.com/

ROTECH LABS , A METALS TESTING AND ADVISORY SERVICE, IS A MEMBER OF THE THE RUBERY OWEN GROUP. This group has over 100 yrs experience in metals technology & manufacturing in automotive, gas & petrochemical industries, general engineering, aerospace and many other sectors. Rotech supplies technical assistance in all phases eg original design, prototype evaluations, production, quality control, proc...
http://www.rotechlabs.co.uk/
Keywords:
metals testing, metals advice, metallurgy, chemical, mechanical, failure analysis, salt spray, non-destructive, metallography, electron microscope, surface analysis, weld tests, weld procedure, welder approval, certification, test reports, ukas accredited, product strength, tensile, hardness, impact, rapid analysis, plating, &, paint, tests, confidential

http://www.rotechlabs.co.uk/

Precision Repair, Calibration, Sales and Service is an ISO/IEC 17025 accredited company servicing the manufacturing industry with inspection equipment repair, calibration and sales. We also do contract inspection, quality training and machine tool calibration.
http://www.prcilab.com
Keywords:
calibration, contract inspection, ISO 17025, gage repair, electronic calibration, machine center calibration, gages, precision tools, metrology, accredited labs, on site calibration, onsite calibration, on-site calibration, surface plates, Sheffield CMM's, cordax, inspection equipment, training, quality, laser calibration, calibration software, vision inspection systems, optical gages, CMM's, ...

http://www.prcilab.com

Flow Dynamics is one of the world's largest primary standard flowmeter calibration laboratories. High accuracy calibrations for liquids, inert and flammable gas flowmeters. Expedited calibrations available.
http://www.flow-dynamics.com
Keywords:
calibration, calibrate, calibrating, flow, flowmeter, flow meter, NIST, MIL, STD, 45662A, turbine, thermal mass, rotameter, rotometer, viscosity, primary, measurement, standard, secondary, verturi, nozzle, bell prover, air, gas, water, gas, hydrocarbon, positive displacement, CEESI, flow technology, dick munns, jet-a, fuel flow

http://www.flow-dynamics.com

Radiometrics is an American Association for Laboratory Accreditation accredited independent Electro-Magnetic Compatibility (EMC) testing and engineering center
http://www.radiomet.com/
Keywords:
Electromagnetic Compatibility, EMC Testing, EMC, Product Safety Testing, Telecom Testing

http://www.radiomet.com/

Chicago Testing Laboratory is used by public agencies and private corporations for consulting, testing, and inspection related to asphalt materials.
http://www.chicagotestinglab.com/
Keywords:
Chicago Testing Laboratory, asphalt, aggregates, asphalt testing, asphalt construction inspection, concrete testing, soil testing, asphalt plant certification, expert witness, job-site start-up, research and investigation, training, Superpave, Asphalt, Mix, Design, Nuclear, Asphalt, Content, Gauge, NCAT ignition oven, Superpave Gyratory Compactor, fuels, motor oils, roofing materials, cutbacks, ...

http://www.chicagotestinglab.com/

Process Instruments has provided Leeds Northrup and Honeywell instrument repair and test equipment calibration services since 1964
http://www.callab.net
Keywords:
calibration, dimensional, temperature, pressure, infrared, electrical, metrology, resistance, nist, electronic, traceability, Honeywell, leeds, northrup, multimeter, test equipment, calibrator, lab, RTD, SPRT, resistor, standard cell, platinum resistance thermometer, thermocouple, thermocoupler, voltage, current, volts, transducer, transducers, Fluke, Omega, ohm, multimeters, dead weight tester, ...

http://www.callab.net

Battery testing
http://www.flcl.ca
Keywords:
lithium batteries, battery testing, lithium, lithium battery testing, dangerous goods testing, transportation, of, dangerous, goods, airworthiness, TSO-C142, airworthiness testing

http://www.flcl.ca

We test to American and European standards new products for electrical safety and electromagnetic compatibility.
http://globaltestlabs.com
Keywords:
EMI, electromagnetic interference, Product Safety, product safety, Electrical Safety, electrical safety, compliance, CE Mark, FCC, IEC, ETSI, OATS, Open, Air, Test, Site, GTEM, gigahertz transverse electromagnetic, electromagnetic, test lab, electromagnetic susceptibility, CT, Connecticut, New England

http://globaltestlabs.com

Independent Laboratory specializing in semiconductor failure analysis and structure characterization, analysis of fiberoptics, MEMS, hybrids, flatpanel displays, magnetic media, PCB. Material, electrical, process analysis. SEMS, FIB, AFM, AugerES, SIMS
http://www.rigalab.com/
Keywords:
Failure Analysis, Reverse Engineering, Semiconductor Analysis, Surface Analysis, Cross Section, Analytical Laboratory, Electron Microscopy, FIB, Auger Electron, Atomic Force Microscopy, X-ray Spectroscopy, Riga Analytical Laboratory, RigaLab, Voltage Contrast, Focused Ion Beam, Secondary, Ion, Mass, Spectroscopy, AFM, SEM, MEMS, Optoelectronics

http://www.rigalab.com/

VMS International is Australia's leading group of calibration laboratories, and has been providing calibration and product solutions to a variety of customers since 1989. All our laboratories are NATA accredited and ISO certified ensuring traceability to standards and quality of measurement, essential in today's competitive environment.
http://www.vms.net.au
Keywords:
VMS, VMS International, CALIBRATION, BALANCING, REPAIR, FLUKE, BIOMEDICAL, AVIATION, SNAPON, BIO-TEK, ALLIED HEALTH CARE, CLINICAL DYNAMICS, DALE, DNI, IVAC CORPORATION, MESA LABORATORIES, METROHM, RESPICAL, RIKEN KEIKI, WYKEHAM FARRANCE, MITUTOYO, NORBAR, WARREN & BROWN, STAHL WILLE, CROWCON, SEW, KAISE, FINEST, CALTEK, KYORITSU, BECKMAN, BELL, TOOLS, Chadwick-Helmuth, Prop/Helo, Dynamic, ...

http://www.vms.net.au

http://www.Analytical-S.co.uk

http://www.Analytical-S.co.uk

Absolute Calibration are the leading independent laboratory providing test equipment calibration and repair of electrical, temperature, humidity, pressure and dimensional measuring instruments.
http://www.absolute-cal.co.uk/
Keywords:
calibration, calibrate, electrical calibration cal, instruments, measurements, measurement parameters, airflow measurements, NAMAS Calibration, test equipment, measure, dimensional.

http://www.absolute-cal.co.uk/

http://www.propacktestlab.com/

http://www.propacktestlab.com/

http://www.municipaltestinglab.com

http://www.municipaltestinglab.com

http://www.indtesting.com/

http://www.indtesting.com/

http://www.beta-lab.com/

http://www.beta-lab.com/

http://www.f2labs.com/

http://www.f2labs.com/

http://www.actlaboratories.com/

http://www.actlaboratories.com/

Help building the largest human-edited directory of the web
Suggest URL - Open Directory Project - Become an editor
directopedia.org uses links and structure from dmoz Open Directory Project.
The contents has been generating using technology developed by scientec.

Wikipedia-Article "Laboratories"

Biochemistry laboratory at the University of Cologne.

A laboratory (often abbreviated lab) is a place where scientific research and experiments are conducted. A lab can hold space for one to thirty, or more, researchers depending on the size of the room and state mandated maximum occupancy limit.

All laboratories share some common features, mainly laboratory equipment and laboratory glassware: Usually, they have at least one fume hood. Toxic and hazardous chemicals can be safely handled in a fume hood. This reduces, and usually eliminates, the risk of inhalation of toxic gases produced by the reaction of chemicals. Laboratories usually have a sink for handwashing. A fire extinguisher is located in a laboratory, as well as a fire blanket, to help exterminate fire in the event of an accident. There is also an eye wash station and an overhead shower in the event that chemicals gain access onto clothes, skin, or eyes. The exceptions to this would include certain engineering and physics laboratories, which usually do not include glassware, hoods, and toxic chemicals.

Supporting the laboratory is usually a stock room, or preparation room, where dry and wet chemicals are stored. This stockroom prepares all the reagents (acids, bases, buffers) of various quantities and concentrations, as well as orders and distributes supplies (glassware, chemicals, personal protective equipment) to the laboratory. In an engineering or physics laboratory, the stock room or preparation rooms are generally used for storing of equipment and repair facilities.

When researchers perform chemical or biological experiments in the laboratory they use pure phases and sterile reagents. Impure chemicals undergo purification first, then are used in an experiment; non-sterile reagents are first autoclaved before use. Impure, and non sterile reagents interfere with experiments causing undesired results.

The equipment and orientation of a laboratory will ultimately depend on its purpose. University laboratories, as well as chemistry and biochemistry laboratories will contain myriad glassware. In these laboratories, general experiments will be performed to isolate or purify compounds, or perform research to gain new knowledge on a given compound or scientific idea.

Other common laboratory equipment includes centrifuges to remove solid particles from a liquid, or create a density gradient, spectrophotometers to accurately measure the optical absorbance of a liquid and a particular wavelength (measure its colour), aspirators for providing suction, and water baths that maintain a substance at a particular temperature.

While there is a typical set of glassware used for conducting various experiments, other laboratories have different requirements and arrangements.

Microbiology laboratories usually have separate rooms with negative pressure to prevent the breathing in of harmful bacteria. Air is often passed through a number of filters and then repumped into the room.

Laboratories designed for processing specimens, such as environmental research or medical laboratories will have specialised machinery (automated analysers) designed to process many samples and numerous tests. Research and experimentation is not a priority in these laboratories; the aim is to give a fast and reliable result.

Laboratory Safety

While laboratories differ in purpose and function, safety is always a key issue.

Below is a list of standard, good laboratory practices:

  1. Wear goggles or safety glasses at all times.
  2. Wear gloves.
  3. Wear a safety apron where appropriate.
  4. Try not to breathe or inhale any chemicals.
  5. Wash your hands with soap and water for at least 20 seconds after contact with chemicals.
  6. Do not eat or drink while in the laboratory (to avoid accidental ingestion of dangerous chemicals).
  7. Do not taste, eat, or drink any chemical in the laboratory.
  8. Read and understand experiment procedures before beginning any experiment.
  9. Dispose of chemicals properly (the sink is generally not the correct place).
  10. Ensure gas lines are shut off before leaving the laboratory.
  11. Do not attempt to undertake experiments or procedures unless a trained chemist or scientist is present.

See also:

Commons
Wikimedia Commons has media related to:
This article is based on the article "Laboratories" from Wikipedia - the free encyclopedia created and edited by online user community. This article is distributed under the terms of GNU Free Documentation License. Here you find the list of authors of this article. The article can only edited within Wikipedia. Edit this article in Wikipedia.