Drilling
Webpages concerning "Drilling"
|
The contents has been generating using technology developed by scientec.
Wikipedia-Article "Drilling"
Drilling is the process of using a drill bit in a drill to produce holes.
Drilling in metal
Under normal usage, swarf is carried up and away from the tip of the drill bit by the fluting. The continued production of chips from the cutting edges produces more chips which continue the movement of the chips outwards from the hole. This continues until the chips pack too tightly, either because of deeper than normal holes or insufficient backing off (removing the drill slightly or totally from the hole while drilling). Lubricants and coolants (i.e. cutting fluid) are sometimes used to ease this problem and to prolong the tools life by cooling and lubricating the tip and chip flow. Coolant is introduced via holes through the drill shank see gun drill bits.
Straight fluting is used for copper or brass, as this exhibits less tendency to "dig in" or grab the material. If a helical drill (twist drill) is used then the same effect can be achieved by stoning a small flat parallel with the axis of the drill bit.
For heavy feeds and comparatively deep holes oil-hole drills can be used, with a lubricant pumped to the drill head through a small hole in the bit and flowing out along the fluting. A conventional drill press arrangement can be used in oil well drilling, but is more commonly seen in automatic drilling machinery in which it is the workpiece that rotates rather than the drill bit.
Drilling in wood
Wood being softer than most metals, drilling in wood is considerably easier and faster than drilling in metal. Cutting fluids are not used or needed. The main issue in drilling wood is assuring clean entry and exit holes and preventing burning. Avoiding burning is a question of using sharp bits and the appropriate cutting speed. Drill bits can tear out chips of wood around the top and bottom of the hole and this is undesirable in fine woodworking applications.
Holes are easier to start in wood as the drill bit can be accurately positioned by pushing it into the wood and creating a dimple. The bit will thus have no tendency to wander. In metal working, an accurate position needs to be marked with a punch to avoid the bit wandering from the desired position of the hole.
The ubiquitous twist drill bits used in metalworking also work well in wood, but they tend to chip wood out at the entry and exit of the hole. In some cases, as in rough holes for carpentry, the quality of the hole does not matter, and a number of bits for fast cutting in wood exist, including spade bits and self-feeding auger bits. Many types of specialised drill bits for boring clean holes in wood have been developed, including brad-point bits, Forstner bits and hole saws.
 WikiProject Metalworking:
|
|
|---|---|
|
Die head | Drill | Drill bit | Drill bit shank | Drill bit sizes | Drilling| Pin chuck| Taps and dies | Tap wrench |
|
|
Metalworking topics: Casting | CNC | Cutting machines | Cutting tools | Drilling and threading | Fabrication | Finishing | Grinding | Jewellery | Lathes | Machining | Machine tooling | Measuring | Metalworking | Hand tools | Metallurgy | Milling | Occupations | Press tools | Smithing | Terminology | Welding |
|