Previous page Next page Bottom Top One level up Home

Packard

Clubs (2)

Webpages concerning "Packard"

The Packard Club is dedicated to the preservation of one of the greatest marques in world automotive history, the Packard Motor Vehicle: Automobiles, Trucks and Professional vehicles.
http://www.packardclub.org/
Keywords:
The Packard Club, Packard Automobile Classics, PAC, Packard, Motor, Car, Company, International, Trucks, Boats, Aircraft, Commercial

http://www.packardclub.org/

The Packard Motor Car Foundation
http://www.packardmotorfdn.org/
Keywords:
packard, foundation, motor, car, classic

http://www.packardmotorfdn.org/

Help building the largest human-edited directory of the web
Suggest URL - Open Directory Project - Become an editor
directopedia.org uses links and structure from dmoz Open Directory Project.
The contents has been generating using technology developed by scientec.

Wikipedia-Article "Packard"

Packard Cormorant hood ornament from a 1941 180 Formal Sedan
Enlarge
Packard Cormorant hood ornament from a 1941 180 Formal Sedan

Packard was a United States based brand of automobile originally known as the Ohio Automobile Co. when its founders built their first car in 1899. It became the Packard Motor Car Company in 1903. Originally based in the Packards' hometown of Warren, Ohio, the factory was moved to Detroit, Michigan in 1903, after a majority of stock was purchased by a Detroit-based group of investors led by Henry Bourne Joy and his brother-in-law, Truman Handy Newberry. When it merged with Studebaker in 1954, Packard was one of the last remaining independent U.S. automakers. The brand went off the market in 1958 but its cars are still highly sought after by collectors today.

Packards were advertised with the slogan "Ask the Man who Owns One".

Contents

History

Legend has it that company founders James Ward Packard and William Dowd Packard were unhappy with the automobiles they had purchased from other makers, and James, a mechanical engineer, had some ideas how to improve on the designs. There are several versions of the story, but by 1899, the two brothers were building automobiles. The company quickly introduced a number of innovations in its designs, including the modern steering wheel and the first production 12-cylinder engine. While Henry Ford was producing cars that sold for $440, Packard concentrated on upscale cars that started at $2,600. Packard automobiles developed a following not only in the United States, but also abroad, with many heads of state owning them.

1913 Packard 6
Enlarge
1913 Packard 6

The Packard Motor Car Company factory complex, designed by Albert Kahn, included the first use of reinforced concrete for industrial construction in the city of Detroit. At its opening, it was considered the most modern automobile manufacturing facility in the world. Its skilled craftsmen practiced over eighty trades. The last Packards rolled off the assembly line on June 25, 1956. The 3.5 million ft2 (325,000 m²) plant covered over 35 acres (142,000 m²) of land and straddled East Grand Blvd. on Detroit's east side. It was later subdivided by eighty-seven different companies. Kahn also designed The Packard Proving Grounds at Utica, Michigan, which is being developed into a historical site.

By World War I, Packard was also producing engines for aircraft and boats.

Packard 120 car of 1936
Enlarge
Packard 120 car of 1936
1941 Packard 180 Formal Sedan
Enlarge
1941 Packard 180 Formal Sedan

In the 1930s, devastated by the Great Depression, Packard started mass-producing cars. In 1935, Packard introduced its first sub-$1,000 car. Car production tripled that year and doubled again in 1936. Packard produced its final hand-built car in 1939.

During World War II, Packard again built airplane engines, licensing the Merlin engine from Rolls-Royce and simplifying and improving it. The Packard engine powered the famous P-51 Mustang fighter, known as the "Cadillac of the Skies" by G.I.s in WWII. It was the fastest non-jet fighter plane ever built, and could fly higher than any of its contemporaries--allowing its pilots a greater degree of survivability in combat situations. They also built 1350, 1400, and 1500 horsepower V-12 marine engines that powered American PT boats (each boat had three) and some of Britain's patrol boats.

By the end of World War II, Packard was in excellent financial condition but suffered from a shortage of raw materials needed to manufacture automobiles again. The firm introduced its first post-war body in 1948, prior to its competition in the major firms (Cadillac, Lincoln, and Chrysler). However, the design chosen was of the "bathtub" style predicted during the war as the destined future of automobiles. Although startling at first, the influence of what were nicknamed "whales" soon vanished. And the post-war seller's market ended in 1951, the industry slumping as a whole in 1952.

Nash Motors president George Mason began approaching Packard about a merger in the early 1950s, believing that the days for independent car manufacturers were numbered. Packard was reluctant. The year 1953 brought about a reversal of fortune, but 1954 was again a down year. On May 1, 1954, Nash Motors merged with Hudson Motor Car, forming American Motors and temporarily ending Packard's opportunity for merger with the former company.

On October 1, 1954, Packard merged with Studebaker creating the Studebaker-Packard Corporation. Initially, Packard's executive team had hoped Studebaker's larger network of dealers would help increase sales. The newly combined company had plans to merge into American Motors after AMC and Studebaker-Packard had achieved financial stability.

The latter merger never happened. Studebaker-Packard was devastated by the loss of millions of dollars in Studebaker's Pentagon contracts after the Korean war ended, which contracts were awarded to GM after that war. George Mason died in 1954, and George Romney (later governor of Michigan and a former Presidential candidate) killed any hope that may have existed for a merger with AMC. Packard's up-again and down-again sales continued, with a profitable year in 1955 thanks to the introduction of Packard's first V-8 engines that model year--although a complete retooling for the 1955 models resulted in products so poorly made that hundreds of cars had to be repaired by dealers before they could be sold to the public. This set the stage for a disastrous 1956, which saw production drop to its lowest levels since World War I. Packard had been selling engines and transmissions to American Motors, but a parts dispute with Romney ended this arrangement in April of 1956. The company severely in debt, its creditors ordered the old Packard plants to close on August 15, 1956.

In 1957 and 1958, a Studebaker-designed car bearing the Packard nameplate appeared on the market, but sales were slow. These badge engineered Studebakers were derisively referred to as Packardbakers by the press and consumers and failed to sell in sufficient numbers to keep the marque afloat. The brand left the marketplace in 1958.

In the Early 1960s, Studebaker-Packard was approached by French car maker Facel-Vega about the possibility rebadging the company's Facel-Vega Excellence sedan as a "Packard" for sale in North America. Daimler-Benz, which was under a distribution agreement with Studebaker-Packard, threatened to pull out of the 1958 marketing agreement, which would have cost Studebaker-Packard more in revenue than they could have made from the badge-engineered Packard.

Packard had a good engineering staff that always designed good engines which were made well. Their early success was with a six-cylinder engine, which was copied by a certain British firm. This was doubled into their twelve-cylinder engine that they called the "Twin Six." They also built a low-compression straight eight, but never a sixteen-cylinder engine. After WWII, they were one of the last US firms to produce a high-compression V-8 engines, the "352", named for its 352 cubic inch (5.8 L) displacement, but it had no problems. However, they built their own automatic transmission (unlike Ford) which, although it had some advantages over Buick's, had its own deficiencies. Their last major development was the "Torsion-Level" suspension, a four-wheel torsion-bar suspension that balanced the car's height like an air-bag suspension, which its American competitors of the time could not get to work and ceased offering.

Modern Packard

A working prototype shown at the Pebble Beach Concours d'Elegance, August 2003
Enlarge
A working prototype shown at the Pebble Beach Concours d'Elegance, August 2003

A new company bearing the name was started up soon after 2000 and produced at least one prototype new Packard. Interest in the prototype has been gathering, and buzz around the car rose steadily following its showing at the Pebble Beach Concours d'Elegance in 2003.

The new Packard company aims to be the only "ultra-luxury" car manufacturer in North America, aiming for spots above the niches currently occupied by Cadillac, Lincoln, and Mercedes-Benz, and competing with such marques as Aston Martin, Rolls-Royce, and -- particularly -- Maybach, a fellow-resurrection from decades past.

Packard automobile models

Body styles/misc. by tradename


Also See Clipper (automobile)

See also

External links

This article is based on the article "Packard" from Wikipedia - the free encyclopedia created and edited by online user community. This article is distributed under the terms of GNU Free Documentation License. Here you find the list of authors of this article. The article can only edited within Wikipedia. Edit this article in Wikipedia.